Wednesday, May 11, 2011

Idea: ArduPilot Differential GPS

Update


Fail... lots of people have thought of this idea and it won't work.


Executive Summary
  • Hook a GPS to GCS.
  • GCS calculates GPS difference.
  • GCS transmits GPS correction over xbee MAVLINK connection
  • ArduCopter Stabilize mode gets very fine resolution.

Background

I was just reading the ArduCopter 2.0 docs and saw this:

The quad should stay in a 4-5 meter diameter "circle" around the target position.

I recalled an old TV show where somebody used differential GPS (hereafter DGPS... is that a common name?) to track glacier movement... they had DGPS receivers planted across the ice, and a DGPS transmitter attached to rock.  I recall being impressed that they were able to get 1-inch resolution.

I googled around for DGPS products -- wouldn't it be neat if you could just buy something and have your ArduCopter hover with that kind of resolution! -- but found out a couple of things:

  • DGPS seems pretty common in the GIS world.
  • the definiton of "highly affordable" DGPS systems was about $15k.  Yikes!
  • "portable" DPGS receivers were touted as being easy to carry around by a single person.
  • DGPS seems to work by sending the sideband correctional signal over some kind of modem.
  • "normal" GPS receivers won't benefit from a DGPS transmitter.

Idea

So, I had an idea for implementing DGPS in the ArduPilot/ArduCopter world.
  • Hook up a GPS unit to your ground control station (GCS).  This could be any GPS unit... You could use a hand-held receiver with USB, make a custom arduino-based unit, etc.  The purpose of this unit is to be near the GCS and feed a love GPS signal of the GCS's current position.
  • When setting up the GCS, allow an absolute current position to be entered.
  • Add a MAVLINK message outbound from the GCS to the plane(s), broadcasting the difference in measured and specified absolute position and altitude.
  • When in stable mode, the ArduPilot software takes the DGPS correction into account if it is available.
  • Super Precision Stable Mode!

2 comments:

  1. Its not called DGPS. DGPS is standard gps technology. I think the industry term for what you are describing is RTK GPS (Real Time Kinematics). I operate gps guided agriculture equipment every day and DGPS is the standard system, accurate to 1 foot or so. RTK is accurate to sub-inch detail and requires a geo-location-known base station and ratio modems to send correction signals to the mobile station. DGPS does not. But ya, that is a sweet idea.

    Here is an link on DIYdrones that has a few insights

    http://diydrones.com/profiles/blogs/gps-rtk-opensource

    cheers!

    ReplyDelete
  2. sokkia total station

    Buy the best sokkia total station and sokkia auto level equipments online at affordable prices. We are here to help you find your best electronic tape match, sokkia total station & auto level equipments. Check our sokkia total station price and shop online at best price.

    visit here

    ReplyDelete